Türkçe

NEW GENERATION BATTERY CHARGER REDRESSOR - RECTIFIERS !

The ADR series redressors have mico-processors and controllers. The network value is decreased to an acceptable value by means of an isolation transformer and the output voltage remains stable, when the angle applied on the thryistors is at a desired level.

Optimum charging is ensured thanks to 3 seperate charging methods known as TRICKLE, TAMPON and BOOST.

The required operation mode is selected through the control card that can be transferred to the board. This is required in order to make sure that the DC is used in order to feed. The aim of usage regarding the redressor shall be expressed during the ordering process, so that the staff adds a LC filter to the DC feeding unit during the manufacturing process.

10A - 500A production can be offered for a battery group and DC feeding unit having a capacity of 12V -220V. There are suitable options for 3 phases and 1 phase.

There is a protective program against excessive current, excessive temperature, low and high voltage. The grounding protection can be added optionally.

The operation status of the device can be monitored on a PC through the RS232 unit. Dry contact information and 0-10V and 4-20mA analog output signals are available.

PLEASE CONTACT US
info@artsan-global.com

DIRECT SALES FROM MANUFACTURING

Our company manufacturing power electronics products since 1996 with over 20 years experience of power sector technical staff.

Products

* Static Regulators
* Servo Regulators
* Transformers
* Reactors
* Power Supply
* Rectifiers
* Inverters
* Special Test Equipment
* Static Transfer Switches (STS)
* Frequency Convertors
* Special Design Products
* SMPS Power Supply

 

Redresörlerimizin Genel Özellikler ;

* Geniş giriş gerilim aralığı,
* Kısa devre aşırı yük aşırı gerilim korumaları,
* %100 yükte test,
* 3 faz girişli sistemlerde 6, 12 pulse doğrultma,
* Fan ile soğutma,
* %3 çıkış,
* İzole trafolu yapı,
* PWM tekniği ile 3 khz tetikleme,
* Tristör modül teknolojisi,
* Kullanım yerine göre özel dizayn,
* Uyarı ledleri ve kuru kontak bilgisi,
* Uluslararası standartlara uygun,
* Yüksek verimlilik,
* Hassas regülasyon - Sessiz çalışma,
* Uygun fiyat / performans.
Redresörlerimizin Genel Teknik Özellikleri ;

* Giriş : 110 VAC, 220 VAC, 380 VAC (1 ve 3 fazlı modeller)
   50/60Hz (%8 tolerans)
* Çıkış : 12 VDC, 24 VDC, 36 VDC, 48 VDC, 96 VDC, 110 VDC,
   220 VDC
   Çıkış akımı : 10A, 15A, 20A, 30A, 50A, 60A, 80A, 100A, 150A,
   200A, 300A, 500A
* RS232 haberleşme portu,
* Otomatik hız ayarlı soğutma fanı,
* Koruma sınıfı : IP20
* Grafik LCD veya LED ekran,
* -20 ve +70 derece çalışma ortamına uygun,
* Mikroişlemci ve PWM ile kontrol,
* Dokunmatik tuşlar, (açma / kapama / sesli alarm susturma)
* %110 yükte 30 dk, %150 yükte 10 saniye besleme,
* Elektronik kısa devre koruması.

STATIC REGULATORS

Since static regulators do not include moving parts, the device does not get worn out. As the regulator is not to be repaired an maintained so often, the life cycle shall be longer.


 

TRANSFORMERS

1 phase and 3 phases isolated transformers are used with the aim of ensuring a safe and reliable operation process for industrial devices. 


 
SERVO REGULATORS

The changes in the network tension are compared with the reference value of 220 V. When the network changes frequently within a short period of time, the regulator can be operated safely thanks to the special management program.
 
RECTIFIERS

The ADR series redressors have micro-processors and controllers. Optimum charging is ensured thanks to 3 separate charging methods known as TRICKLE, TAMPON and BOOST.


 
INVERTERS

DC sources are used in order to make sure that devices operating with a network do operate, when there is no network. However as DC sources are not able to ensure that devices operate directly, there is a need for inverters.

 
SPECIAL PRODUCTS

Elektrodeiyonizasyon, iyon değiştirme reçinelerini kullanarak, proses suyunda bulunan iyonları giderir. Bu sayede su saflaştırılır ve klasik reçineli saflaştırma proseslerinin neden olduğu, su sarfiyatı, para ve rejenerant kayıpları önlenir. Drenajdan atılan su miktarı %5 tir. Kullanımı pratiktir.


Our products are exporting to 25 counturies such as KENYA, IRAQ, MACEDONIA, AZERBAIJAN, PAKISTAN, UKRAINE, IRAN. All our products has CE certification and our company has ISO9001 certification.

 

(C) 2014 Global | Artsan Group - All Rights Reserved.
Sales : Perpa Ticaret Merkezi A Blok Kat:5 No:134 Okmaydani - Sisli / ISTANBUL / TURKIYE
T: 0090 850 800 14 55 Pbx - 0090 212 320 78 80 Pbx (Sales : 111,116,117, Technical Service : 121)  F : 0090 0212 320 78 89 M : info@artsan-global.com / www.artsan-global.com